Localisateurs visuels défauts

This Baitaihem FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. Typical Cleave Angle: 0.5 Degrees. Cleave Length: 9 - 16mm (Single Fiber - 0.25mm Coating), 10 - 16mm (Single Fiber - 0.9mm Coating).

Very good USED WORKING Condition.

Noyes fibre optic VFI 1 fault finder in goid used condition with leads a case as pictured

Very good USED WORKING Condition.

Driven by constant current source, the indicator can emit stable or pulsed red visible light source. The product can be used to inspect fibre failure when they connect with optical interface and be inserted into single mode or multi mode optical fibre.

Output power: 10mW. Optical connector: 2.5mm universal connector. Storage temperature: -20~ 70 ℃.

1x FC adaptor (installed on the host). 1 x Fiber Fault locator. 1x SC adaptor.

Very good USED WORKING Condition.

Greenlee f1-100 fibre identifier with adaptors (brand new) with case

650nm Pen-type Visual Fault Finder for fiber tracing, fiber routing and continuity checking. EASY IDENTIFICATION OF FIBER BREAKPOINTS, POOR CONNECTIONS, BENDING OR CRACKING - The RISEPRO® 10mW Visual Fault Locator Emit a 650nm Bright Red Light For Fiber Tracing, Fiber Routing And Continuity Checking Efficiently, Breaks Or Faults In The Fiber Will Refract The Light, Creating A Bright Glow Around The Faulty Area.

Conditions of sale .

Output Power: 30mW. 1 30mW Visual Fault Locator. It includes: Finding the breakpoints, poor connections, bending or cracking in fiber optic cables. -Optical Connector: 2.5mm universal connector for test different ST, SC, FC interferes.

1 Visual Fault Locator. Fiber Applications: singlemode/multimode. There is MOD and CW working mode,SC,ST,FC,2.5mm universal interface,detection range,output power stability. Wavelength: 650 nm.

Test for both single-mode and multi-mode ST/SC/FC interface fiber optic cables. Indicating light and laser will work synchronously.

Notebook Diagnosekarte "ST8669" 4digit. Notebook Mainboard Test Parallelport 4digit!, von M-ware®. Geeignet für fast alle gängigen Notebooks/PCs mit entsprechender Anschlussmöglichkeit. Der USB-Anschluss dient nur der Spannungsversorgung.

A photolink fiber optic transmitter that uses a 660nm AlGaAs LED and drive IC. The incoming electrical signal is converted to an optical signal which can be transmitted via ø1mm optical fiber. The device gives high performance at a low dissipation current and has a steady light output and efficient light coupling.

Tested. 2New or as new. Otherwise excellent condition. Powers up but not tested further. 4Good condition. Scratches, often heavy, or blemishes.

EASY IDENTIFICATION OF FIBER BREAKPOINTS, POOR CONNECTIONS, BENDING OR CRACKING - The RISEPRO® 30mW Visual Fault Locator Emit a 650nm Bright Red Light For Fiber Tracing, Fiber Routing And Continuity Checking Efficiently, Breaks Or Faults In The Fiber Will Refract The Light, Creating A Bright Glow Around The Faulty Area.

EASY IDENTIFICATION OF FIBER BREAKPOINTS, POOR CONNECTIONS, BENDING OR CRACKING - The RISEPRO® 10mW Visual Fault Locator Emit a 650nm Bright Red Light For Fiber Tracing, Fiber Routing And Continuity Checking Efficiently, Breaks Or Faults In The Fiber Will Refract The Light, Creating A Bright Glow Around The Faulty Area.

Visual Fault Locator Red Light Pen 10mV Fiber Optic Cable Tester Test Equipment EASY IDENTIFICATION OF FIBER BREAKPOINTS, POOR CONNECTIONS, BENDING OR CRACKING - The RISEPRO® 10mW Visual Fault Locator Emit a 650nm Bright Red Light For Fiber Tracing, Fiber Routing And Continuity Checking Efficiently, Breaks Or Faults In The Fiber Will Refract The Light, Creating A Bright Glow Around The Faulty AreaWIDELY USED ON FC, SC, ST GENERAL FIBER INTERFACE - This Visual Fault Locator Built With 2.5mm Universal Connector For Testing Different ST, SC, FC Interferes Fiber Optic CablesCRASH-PROOF AND DUST-PROOF DESIGN FOR PEN HEAD - It Is Designed With Stainless Steel Head To Prevent Crash And Dust, And The Case Ground Design Prevents ESD Damage Efficiently.OPERATES EITHER IN CW OR PULSED - This Visual Fault Locator Can Operates Either I.

Delipop 30MW Visual Fault Locator Fiber Optic Cable Tester Range 30Km Product Features --- There is MOD and CW working mode,SC,ST,FC,2.5mm universal interface,detection range,output power stability. --- For testing the position of the optical fiber,bending, etc.,in the OTDR blind fault detection, and finally to the end of the optical fiber identification,mechanical connection point optimization. --- Widely used in telecommunications,cable television engineering and maintenance,integrated wiring,construction and maintenance,optical equipment,production and research,other fiber engineering.

Output Power: 30mW. 1 30mW Visual Fault Locator. It includes: Finding the breakpoints, poor connections, bending or cracking in fiber optic cables. -Optical Connector: 2.5mm universal connector for test different ST, SC, FC interferes.

Light emitting optical fiber with wavelength of 650 nm. It is a compact and portable device. Specs Wavelength of 650 nm. Power: 10 mW. Applicable to the SM and MM fiber. Type laser DFB-LD. Typical Output Power: -7 dBm (single mode) and -9 dBm (multimode).

Click here to see description.

Test for both single-mode and multi-mode ST/SC/FC interface fiber optic cables. Indicating light and laser will work synchronously.

Test for both single-mode and multi-mode ST/SC/FC interface fiber optic cables. Indicating light and laser will work synchronously.